BOOSTER PUMP CMB 1-36
Applications Grundfos CM PM1 Booster is mainly used for domestic and light commercial water supply or booster systems.
| Liquid: | ||
| Pumped liquid: | Water | |
| Liquid temperature range: | 0 .. 60 °C | |
| Liquid temp: | 20 °C | |
| Density: | 998.2 kg/m³ | |
| Technical: | ||
| Speed for pump data: | 2900 rpm | |
| Rated flow: | 1.7 m³/h | |
| Rated head: | 24.2 m | |
| Primary shaft seal: | AVBE | |
| Approvals and markings: | CE,C-TICK | |
| Start pressure: | PM1 – 1.5 bar | |
| Materials: |
| Pump housing: | Cast Iron | |
| EN-JL1030 | ||
| AISI 30B | ||
| Impeller: | Stainless steel | |
| DIN W.-Nr. 1.4301 | ||
| AISI 304 | ||
| Rubber: | EPDM | |
| Installation: | ||
| Maximum ambient temperature: | 55 °C | |
| Flange standard: | WHITWORTH THREAD RP | |
| Pump inlet: | Rp 1 | |
| Pump outlet: | EXT. G1 | |
| Electrical data: | ||
| Rated power – P2: | 0.28 kW | |
| Mains frequency: | 50 Hz | |
| Rated voltage: | 1 x 220-240 V | |
| Maximum current consumption: | 3,1-2,8 A | |
| Rated speed: | 2730-2740 rpm | |
| Enclosure class (IEC 34-5): | IP55 | |
| Insulation class (IEC 85): | F | |
| Type of cable plug: | AU | |
| Mains cable: | 1.5 m | |
| Others: | ||
| Net weight: | 13.8 kg | |
| Gross weight: | 16.4 kg | |
